Thread mounted lab pressure reactor
Thread mounted lab pressure reactor; 25ml-500liters；60bar；240℃；SS304 or SS316 Hydrothermal autoclave | Hydrothermal synthesis autoclave reactor | Hydrothermal high pressure autoclave reactor Hydrothermal vessels | PTFE lined hydrothermal autoclave/ Thread mounted lab pressure reactor/ lab pressure reactor/Non stirred pressure reactor/ Non stirred pressure vessel/ Non stirred pressure autoclave
- HXCHEM
- China
- 5 days after payment
- 400 sets/month
Details
Thread mounted lab pressure reactor
INTRODUCTION
This series is suitable for laboratory table test, which is used for chemistry and chemical engineering synthetic reaction under high pressure or catalytic reaction, and such environmental., etc.
Thread mounting; Screw Cap Closures
Volume: 50ml, 100ml, 200ml, 250ml, 500ml;
Pressure up to 60bar;
Temperature up to 240℃；
Materials： SS-304, SS-316, Hastelloy B/C, Titanium,PTFE, PPL liner, etc.
Pressure gauge, temperature sensor, rupture hole.
Structure Features
Inlet gas valve: gas inlet and outlet needle valve, connected to 3mm or 6mm ferrule.
Sampling valve: It is convenient to take samples at any time during the reaction and analyze the reaction process to connect 3mm or 6mm ferrules (optional).
Exhaust valve: It is convenient to vacuum and replace the gas before the reaction. After the reaction, it is used as a vent valve.
Stainless steel pressure gauge: real-time monitoring of reaction pressure.
Temperature probe optional: deep inside the reactor body, real-time monitoring of reaction temperature.
Application:
Hydrothermal Synthesis；Acid digestion；
High pressure none leakage application；
Corrosion test, and catalyst test；
For Gas / Liquid storage / charging under pressure；
Hydrogenation；Organic synthesis；Polymerization；
SPECIFICATION
GSHA Hydrothermal Synthesis Reactor Standard Speicification as fellow:
| Model | GSHA-25 | GSHA-50 | GSHA-100 | GSHA-150 | GSHA-200 | GSHA-250 | GSHA-300 | GSHA-500 | GHSA-1000 |
| Volume | 25ml | 50ml | 100ml | 150ml | 200ml | 250ml | 300ml | 500ml | 1000ml |
| Max temperature | Standard 300℃(<240'℃ For PTFE 1iner) | ||||||||
| Operate pressure | <6Mpa(60bar) | ||||||||
| Material | Standard SS304 (PTFE liner, titanium,C-276 optional) | ||||||||
| Stirring speed | Inner PIFE magnetic stirrer:60-2400rpm | ||||||||
| Top cover type | Cover lid with thread connect | ||||||||
| Valve type | Ferrule-type needle valve, connect with 6mm pipeline | ||||||||
| Opening port | 1 gas port with needle valve; 1*liquid port with needle valve & dip tube; 1*Pressure gauge (6mpa range): 1*rupture disc ( 7mpa opening pressure); 1* temp. Measure port | ||||||||
| Voltage | 220V/50Hz,110V/60Hz optional | ||||||||
The dimensions and parameters in the table are for reference only, and the actual size must be the same as the finals.
